Cards/PINs

Within the FollowMe Q-Server one can assign multiple ID cards and PIN numbers to each user, these cards can be added and deleted at any time during the running of the solution.

Assigned Cards/PINs

The assigned ID cards and PIN numbers for the selected user are listed in this list box.

Add New Card/PIN

One can add new ID cards and PIN numbers to a user by either manually entering or automatically listening for the ID card or PIN number. To Listen for a ID card one must first select an assignment device that should be used for card enrolment.

Assign Enrolment Device

To select an assignment device one simply should select the device from the drop down list and click the Assign button, once assigned one should refer back to the Add New Card/PIN section to Listen for a ID card from an enrolment device.

Once the enrolment device has been assigned the Selected Enrolment Device should update.

Note: The selected Enrollment Device will timeout automatically after 10 minutes of no use and return to normal operation.

HEX, DEC and ASCII

When adding card numbers to a user there are data entry types that are provided these are hexadecimal (HEX), decimal (DEC) and ASCII. The difference between each is how the entered data is formatted, for example when using decimal you will only be able to enter numbers. By default data should be entered as ASCII other than if the card number has been enrolled from an enrolment device and then in this instance you should use the default type which will change once the card number has been received.